


All Temp Soft Covers manufactures custom removable insulation covers for Alaska fishing vessels, seafood processors, tugs, workboats and generators. Founded in 2015, we build every cover in Blaine, Washington, and we ship to Alaska. Each cover is made for one part, comes off for service, and goes back on. We manufacture only; we do not install.
Quick answer: Send photos or a short video, any measurements you have, and part numbers. The owner walks your crew through measuring by phone or video call. We build the covers in Blaine and we ship to Alaska.
Ratings at a glance: Inner insulation rated 1,000°F continuous / 1,200°F max. Gray silicone outer cloth rated 450°F continuous / 500°F max. Tan cloth is for indoor and engine-room use only.
Removable insulation for Alaska fishing vessels
Alaska fishing fleets work out of ports a long way from most insulation shops: Dutch Harbor and Unalaska, Kodiak, Bristol Bay ports such as Naknek, and Southeast ports including Ketchikan, Sitka and Petersburg. Boats out of Homer and Seward need the same exhaust and engine-room covers that come off at the yard and go back on for the next trip.
The hottest parts are usually the exhaust elbow, riser, manifold, turbo and muffler, plus the generator exhaust. We build custom marine exhaust blankets and marine turbo blankets for those parts. For more background, see removable insulation for Alaska fishing vessels and seafood processors and marine exhaust insulation shipped to Alaska.
Seafood processors and shore plants
Shore plants and floating processors need covers that come off for inspections and wash-down, not insulation that has to be cut away. We make valve and flange insulation jackets and pipe insulation jackets for process and steam lines, plus heat exchanger and boiler and steam covers. Plant powerhouses use the same generator exhaust insulation blankets we build for marine gensets. That work fits plants in and around Unalaska, Kodiak, Naknek, Ketchikan, Sitka, Petersburg, Homer, Seward and Anchorage.
Tugs, workboats and generators
Tugs and workboats running Alaska routes have the same exhaust, turbo and genset needs as catcher boats, often with less room around the engine. We build those engine-room covers the same way: one cover per part, measured by photo or video, then shipped to the vessel or port. Marine gensets, plant powerhouses and standby units also need removable blankets on hot exhaust, flex sections and mufflers.
What we make for Alaska boats and plants
• Marine exhaust blankets and lagging for elbows, risers, manifolds, dry stacks, flex sections, mufflers and silencers
• Marine turbo blankets shaped to the turbine housing, with openings for oil, coolant and sensor lines
• Engine-room and generator exhaust blankets for marine gensets and shore-side units
• Valve and flange jackets and pipe jackets for seafood plants and engine rooms
• Heat exchanger, pump and boiler and steam covers when those parts are on the same job
Why removable covers make sense in Alaska
A removable cover comes off for an overhaul or inspection and the same cover goes back on. It covers hot surfaces a crew member might brush against and keeps heat in the exhaust, away from hoses, wiring and fuel lines. Covers also help with noise reduction. You do not need to fly someone in to measure. Photos, a video call and our measuring guide are enough to start.
How to order from Alaska
You can start a quote from the boat, the plant or a yard.
1. Photos or a short video of each part from a few angles, including lines that have to stay reachable.
2. Measurements you already have: pipe size or circumference, lengths, cutout centers, and heel and throat on 90° elbows. See how to measure.
3. Part numbers and temperatures, if you know them.
4. Conditions around the part: salt air, oil, wash-down or outdoor exposure, so we can match the outer cloth.
Then the owner gets on the phone or a video call with your crew and goes through each measurement before anything is built.
We ship to Alaska
We ship to Alaska. Covers can go to the boat, the plant or the port where you are working. If the boat will be in Washington first, they can also go to Seattle, Bellingham or our home port in Blaine. Tell us the delivery address when you order.
Small projects take up to 2 weeks. Larger projects take 3 to 6 weeks. Completion time varies with project complexity. If you are planning around a yard period or the start of the season, send photos and measurements early.
Alaska marine insulation FAQ
How do I order insulation covers from Alaska?
Send photos or a short video of each part, any measurements you have, and part numbers to info@alltempsoftcovers.com, or call (360) 383-6857. The owner then walks your crew through measuring by phone or video call before anything is built. Our measuring guide at www.alltempsoftcovers.com/how-to-measure-insulation-covers shows what to measure. We manufacture in Blaine, Washington, and we ship to Alaska.
Do you ship covers to Dutch Harbor, Kodiak and other Alaska ports?
Yes. We ship to Alaska, including Dutch Harbor and Unalaska, Kodiak, Naknek and other Bristol Bay ports, Ketchikan, Sitka, Petersburg, Homer, Seward and Anchorage. Covers can go to the boat, the plant or the port where you are working. Tell us the delivery address when you order.
What equipment can you make covers for on Alaska boats and in seafood plants?
We build custom removable covers for main-engine and generator exhaust, including elbows, risers, manifolds, mufflers and turbos, plus engine-room piping. For seafood plants we also make removable jackets for valves, flanges, pipe, heat exchangers and boiler or steam equipment. Each cover is made to the measurements of the actual part.
How long does an order take?
Small projects take up to 2 weeks. Larger projects take 3 to 6 weeks. Completion time varies with project complexity. If you are planning around a yard period or the off-season, send photos and measurements early.
Do you install the covers in Alaska?
No. We manufacture only. Covers ship ready for your crew, engineer, mechanic or yard to install, and they are made to come off for service and go back on.
What temperature ratings do the covers have?
High-temperature covers use an inner insulation rated 1,000°F continuous (1,200°F max), a stainless wire mesh hot face, and a gray silicone outer cloth rated 450°F continuous (500°F max). The gray cloth is the outer layer for wet, outdoor and wash-down areas. Our tan cloth is for indoor and engine-room use only and is not made for outdoor weather.
Get a free quote
Send photos, measurements and part numbers, and we will take it from there. Call (360) 383-6857, email info@alltempsoftcovers.com, or request a free quote.
All Temp Soft Covers, 7460 Clamdigger Dr, Blaine, WA 98230. We manufacture and ship only; we do not install.
Related: Alaska fishing vessels and seafood processors · Marine exhaust insulation shipped to Alaska · Seattle · Bellingham · Blaine · How to measure · FAQ




