top of page
Search

How to Maintain Removable Insulation Soft Covers

Writer: alltempsoftcovers
alltempsoftcovers
Oct 18
2 min read

Updated: 3 days ago

Removable insulation soft covers last for years if you treat them like equipment, not decoration. Here’s how to keep them performing.

Quick answer: inspect covers every time they come off, keep them dry, clean them with mild soap and water, store them loosely, and refit them in the same closure order. Replace any section that looks glazed, brittle or oil-soaked. For a replacement section, send photos and measurements and we'll build it to match.

Inspect Before and After Every Use

Split view of a turbocharger and exhaust pipe in an engine room, bare metal on left and insulated pipe on right.

Check the outer jacket for tears, abrasion, or loose stitching. A small hole lets moisture in, and wet insulation loses most of its thermal value. Check Velcro, snaps, and lacing closures too — if they won’t cinch tight, heat escapes at the seams.

Keep Them Dry

Moisture is the number one killer. If a cover gets soaked from a leak, washdown, or marine spray, air dry it completely before reinstalling. Never trap a damp cover against a hot pipe — trapped steam cooks the inner insulation from the inside out.

Clean with Mild Soap and Water

Wipe jackets with a soft cloth and mild detergent. Avoid harsh solvents, bleach, and high-pressure washers — they break down silicone or Teflon-laminated coatings. For oily buildup around engines and exhausts, use a degreaser rated safe for coated fabrics.

Store Properly Off-Season

When equipment is down, remove covers, dry them fully, and fold loosely. Don’t stuff them in a bin — crushed folds crack the insulation and weaken the shell.

Reinstall Correctly

Make sure the cover matches the equipment it’s rated for. An oversized cover leaves air gaps; an undersized one strains the seams. Follow the closure sequence so tension spreads evenly.

Watch for Heat Damage

If a section looks glazed, brittle, or discolored, it’s been running past its temperature rating. For reference, our inner insulation is rated 1,000°F continuous / 1,200°F max, and our gray outer cloth is rated 450°F continuous / 500°F max. That’s a sign to replace that section before it fails in service.

Bottom line: dry, clean, snug, and inspected. Do that and a quality removable cover will last for years.

Contact ALL TEMP SOFT COVERS for all your removable insulation cover needs.

We provide custom solutions for commercial, industrial, and marine applications.


All Temp Soft Covers

Office: 360‑383‑6857

Mobile: 360‑927‑9769


 
 
 

Comments

bottom of page