top of page

Marine Exhaust Insulation in Anacortes and Skagit County

Writer: alltempsoftcovers
alltempsoftcovers
4 days ago
3 min read

Anacortes is one of the busiest boating towns in Western Washington: commercial fishing boats, workboats, cruising yachts, sailboats with diesel auxiliaries, and boats getting refits in local yards. Sooner or later, every one of those engine rooms needs exhaust insulation replaced. All Temp Soft Covers builds custom removable exhaust and engine-room insulation in Blaine, a short drive north on I-5, and we serve Anacortes and the rest of Western Washington.

Common exhaust insulation problems

  • Lagging that was cut off for service and never replaced. A very common one.

  • Oil-soaked wrap around risers and elbows. Insulation that's soaked up oil or fuel is a hazard on a hot surface and should come off.

  • Worn-out wrap and tape that's fraying or crumbling.

  • A hot engine room because sections of exhaust are bare.

  • New or repowered engines where the old insulation simply doesn't fit anymore.

Why removable covers instead of re-wrapping

Traditional lagging and exhaust wrap are applied in place, so they're usually destroyed when someone needs to get at the exhaust. A removable cover is sewn to fit one part and closes with fasteners. That means:

  • A mechanic opens the section they need, does the work and closes it again.

  • Covers are split at joints, so one service point doesn't mean redoing the whole run.

  • The engine room stays protected and tidy between service jobs.

What we make for Anacortes boats

We build for boat builders, commercial fishing vessels, yachts, tugs and workboats. Typical parts:

For high-temperature exhaust builds, our inner insulation is rated 1,000°F continuous (1,200°F max) and the gray outer cloth is rated 450°F continuous (500°F max), with a stainless wire mesh hot face. On high-vibration marine engines we recommend stainless lacing wire for closures, because it won't melt, stretch or shake loose.

Refits and yard work

If your boat is in a yard for a refit or repower, that's the ideal time to replace exhaust insulation. The exhaust is exposed, the measurements are easy to take, and the new covers can go on as the work wraps up. Your yard or mechanic can take the photos and measurements, or you can. We manufacture only, so whoever is doing the work on the boat fits the covers.

Don't forget the rest of the engine room

Exhaust is usually the priority, but while you're measuring it's worth looking at what else is bare. Generator exhaust, hot piping, valves and flanges near walkways are all places where a removable cover helps protect the crew and keeps heat out of the space. Measuring everything in one visit saves a second trip into the engine room, and we can build the full set together so the covers match.

How ordering works from Anacortes

  1. Photograph each section of the exhaust from a few angles, including what sits close to it.

  2. Note the engine make and model and any part numbers.

  3. Measure pipe size or circumference, lengths, elbow heel and throat, and the centers of cutouts. Our measuring guide explains each step. Measure only when the engine is cold.

  4. The owner goes over it with you by phone or video call so everything is right before we build.

  5. We quote, build and ship the covers to you.

We build a single replacement cover or a full set. And if your boat heads north for the season, we also ship anywhere in Alaska.

FAQ

Are you close to Anacortes? We're in Blaine, Washington, in Whatcom County, and we serve Anacortes, Bellingham, Seattle and all of Western Washington.

Can my mechanic or yard order the covers? Yes. We work with boat owners, yards, mechanics and boat builders alike.

Do you install? No. We focus only on manufacturing. Covers ship ready to install.

Get a quote

Send photos and measurements through our free quote form, call 360-383-6857 or email info@alltempsoftcovers.com.

All Temp Soft Covers, LLC · Custom removable insulation covers · Made in Blaine, WA · Serving Anacortes, Bellingham, Seattle and Western Washington · Shipping nationwide, including Alaska

All Temp Soft Covers logo

Comments


bottom of page