What Is a Removable Flange Jacket, and When Should You Use One?


A removable flange jacket is an insulation cover made to fit a bolted flange. It laces closed around the flange, and it comes off when someone needs to check the bolts, tighten them, or replace a gasket. Then it goes back on.
Quick answer: Flanges are one of the parts most often left bare on an insulated line, because they have to be opened up. A removable flange jacket fixes that. You get insulation on the flange and you can still get to it. Send us photos and measurements, and we build the jacket in Blaine, WA and ship it to you anywhere in the U.S., including Alaska. We manufacture only. Your crew or contractor puts it on.
Why flanges get left bare
When a pipe system is insulated, the flanges and valves are often skipped. The reason is simple: permanent insulation on a flange would have to be torn off every time the joint is opened. So it never goes on, and the flange stays hot to the touch.
A bare flange on a hot line is a burn risk, and it is a spot where heat escapes from a line that is otherwise insulated. A removable flange insulation cover handles both without making maintenance harder.
What a removable flange jacket covers
A flange jacket is made to the flange and the stretch of pipe next to it. It can be made for:
Pairs of flanges on a straight run
Flanges at valves, strainers and pumps
Flanges at elbows and other fittings
Flanged connections on exhaust piping
We often build the flange jacket together with the valve jacket next to it, so the whole valve and flange assembly is covered and every handwheel and stem stays outside. See our valve and flange insulation

jackets for the full list. For the pipe between flanges, see removable pipe insulation jackets.
How a removable flange jacket is built
Each jacket is made in layers, with the materials matched to the line temperature and to where the flange sits:
Hot face: stainless wire mesh on high-temperature builds
Insulation: E-glass needled mat with no chemical binders, rated 1,000°F continuous and 1,200°F max
Outer cloth: gray silicone cloth, rated 450°F continuous and 500°F max
Closure: stainless wire lacing and anchors
The jacket is sized to the flange and its bolts, so it covers the joint and then laces open for inspection.

The outer cloth is rated lower than the insulation under it. Tell us the line temperature when you ask for a quote and we'll check the build against those ratings before we make anything.
When a removable flange jacket makes sense
A removable flange jacket is a good fit when:
the flange gets bolt checks, re-torquing or leak inspections
the joint is opened for gasket or valve work
the line is hot enough that people can burn themselves on a bare flange
you've torn insulation off a flange before and not put it back
you want a flange to match the rest of an insulated system
If a flange will never be opened again, ordinary fixed insulation can do the job. Most flanges get opened, which is why people ask for removable flange insulation.
Boats and the Coast Guard
On a boat, flanges show up on exhaust piping, other hot lines and engine-room equipment. For small passenger vessels, 46 CFR 177.970 says piping, including valves, pipe fittings and flanges, that carries a vapor, gas or liquid above 150°F (65.5°C) must be suitably insulated where necessary to prevent injuries. Which rules apply depends on your vessel, so check with your surveyor or the Coast Guard. A removable flange jacket is one way to insulate a joint you still need to open. We don't certify vessels or tell you what a vessel needs to pass.
How to order a removable flange jacket
You don't need a site visit, and you don't need to be near Blaine.
Send what you have. Photos of each flange from a few angles, with the bolts and the pipe on both sides in view. Include the pipe size, the flange size, part numbers or drawings, the line temperature and how many jackets you need.
Measure with the owner. He walks you or your crew through the measuring by phone or video call, so every number is right before anything is built. Our measuring guide shows what to measure.
We build it in Blaine, WA. Lead time depends on the size of the job.
We ship it to you, anywhere in the U.S., including Alaska. Your crew or contractor puts it on. We don't install.
Get a free quote, call 360-383-6857, or email info@alltempsoftcovers.com.
Removable flange jacket FAQ
What is a removable flange jacket?
It is a made-to-measure insulation cover for a bolted flange that laces closed and comes off for inspection, bolt work or a gasket change, then goes back on.
What is the difference between a flange insulation jacket and a valve insulation jacket?
A flange insulation jacket covers the flange joint. A valve jacket covers the valve body. We often make them together so the whole assembly is covered. Our Valve Insulation Jackets and Flange Covers buyer's guide goes into the valve side.
Can I order just one removable flange insulation cover?
Yes. We make a single jacket for one flange, or a full set for every flange and valve on a project.
What temperature can a removable flange jacket handle?
Our inner insulation is rated 1,000°F continuous and 1,200°F max. The gray outer cloth is rated 450°F continuous and 500°F max. Tell us the line temperature and we'll check the build.
Do you ship removable flange insulation to Alaska, and do you install it?
We ship anywhere in the U.S., including Alaska. We don't install. Your crew or contractor puts it on, and the owner walks you through the measuring by phone or video.
Get a removable flange jacket quote
All Temp Soft Covers was founded in 2015 and builds removable insulation covers in Blaine, Washington. Send photos of your flanges and we'll quote them for free.
Phone: 360-383-6857
Email: info@alltempsoftcovers.com
More on this topic: <a href="https://www.alltempsoftcovers.com/valve-flange-insulation-jackets">valve and flange insulation jackets</a> · <a href="https://www.alltempsoftcovers.com/removable-pipe-insulation-jackets">removable pipe insulation jackets</a> · <a href="https://www.alltempsoftcovers.com/post/removable-pipe-insulation-jackets-when-they-make-sense">Removable Pipe Insulation Jackets: When They Make Sense</a>




Comments